4 Crochet Home Accessory Ideas

BySIMO

Try four crochet home accessory ideas: chair-leg socks, a decorative guitar cradle cover, a turtle tissue cover and a mushroom jewelry display. Each image below has its own original written construction, materials, stitch counts, assembly and finishing notes.

Pattern transparency: All instructions in this article are original, photo-inspired interpretations and have not been physically tested. They are not the original designer’s patterns, and an exact match to any photograph or pictured chart is not promised. Some intricate references are intentionally simplified. Make and wash a sample, check each count and adjust measurements before committing to a large project.

US crochet terms and working rules

ch = chain; sl st = slip stitch; sc = single crochet; hdc = half double crochet; dc = double crochet; inc = 2 stitches in one stitch; sc2tog = single crochet two stitches together; st(s) = stitch(es); sp = space; RS = right side. A magic ring is an adjustable yarn loop. Numbers in brackets give end-of-round or end-of-row counts. Repeat instructions between parentheses the stated number of times.

Unless a step explicitly says otherwise, beginning chains do not count as stitches. For dc rounds, ch 2 to reach height, then work the first dc into the first stitch; join to the first real dc. For sc rounds, ch 1 and join to the first sc. For flat sc rows, ch 1 and turn. Flat dc rows explicitly use ch 3 as the first counted dc. Do not work into joining slip stitches. Change color by completing the last yarn-over of the preceding stitch with the new yarn.

To work sc2tog: insert hook into the next stitch and draw up a loop, repeat in the following stitch, yarn over and draw through all three loops. For a surface slip stitch, bring the yarn up from behind the fabric, insert the hook into the next chosen gap and pull the new loop through the loop already on the hook. Keep these stitches loose.

Additional US terms: inc = 2 stitches of the stated type in one stitch; sc2tog/dc2tog/dc3tog = work two or three stitches together as named; sc3tog = single crochet three together; BLO = back loop only; FPdc = front-post double crochet; BPdc = back-post double crochet; tr = treble crochet. Ch 3 counts as one dc unless stated otherwise; ch 1 for turning does not count. Close joined rounds with a sl st unless continuous rounds are specified. Photographed charts are visual references, not patterns verified or transcribed here.

1. Chair-Leg Protector Socks

Chair-Leg Protector Socks in mustard and cream
Chair-Leg Protector Socks — visual reference for an original, physically untested crochet interpretation.

This chair-leg protector socks combines mustard and cream with the form shown in the reference. The original construction below simplifies details that cannot be reliably recovered from a photograph; it does not promise an exact chart match.

Materials, gauge and size

Firm cotton, approximately 40–100 g for four chair socks, 50–100 g for a decorative guitar-support cover, or 250–500 g for the turtle or mushroom display. Colors: mustard and cream. Hook: 3–4 mm. These are estimates: weigh a sample, multiply by component count and add 15–20% for joining and adjustments.

Also use a yarn needle, scissors, stitch markers, measuring tape and blocking pins. For the guitar use an existing properly installed rated instrument holder. For the mushroom add a stable purchased base and post; for the turtle add a fitted tissue box. These structural supplies are part of the project.

Gauge and sizing: Use 20 sc × 22 rows per 10 cm as a planning gauge, then measure every purchased support and fitted household item.

Measured chair-leg protector

  1. Use firm washable cotton. Measure the chair foot circumference C. At 20 sc per 10 cm, choose N = C × 2 rounded to a multiple of six, allowing a snug fit. Worked example: a 9 cm circumference foot uses 18 sc; make and test one before making four.
  2. Round 1: 6 sc in magic ring [6]. Round 2: inc around [12]. Round 3: (sc, inc) six times [18]. Round 4: sc BLO [18]. Rounds 5–18: sc around [18]. Change mustard and cream stripes every four rounds. For a taller leg sock add plain rounds; for a larger foot add complete six-increase base rounds before the BLO turn.
  3. Work one final loose sl st round and weave ends. Make four matching protectors. Add a felt pad inside the bottom if appropriate and confirm the chair stays level and stable on the actual floor. The crochet is a decorative abrasion cover, not a load-bearing furniture repair.

Assembly and finishing

  1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
  2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

2. Decorative Guitar Cradle Cover

Decorative Guitar Cradle Cover in cream
Decorative Guitar Cradle Cover — visual reference for an original, physically untested crochet interpretation.

This decorative guitar cradle cover combines cream with the form shown in the reference. The original construction below simplifies details that cannot be reliably recovered from a photograph; it does not promise an exact chart match.

Materials, gauge and size

Firm cotton, approximately 40–100 g for four chair socks, 50–100 g for a decorative guitar-support cover, or 250–500 g for the turtle or mushroom display. Colors: cream. Hook: 3–4 mm. These are estimates: weigh a sample, multiply by component count and add 15–20% for joining and adjustments.

Also use a yarn needle, scissors, stitch markers, measuring tape and blocking pins. For the guitar use an existing properly installed rated instrument holder. For the mushroom add a stable purchased base and post; for the turtle add a fitted tissue box. These structural supplies are part of the project.

Gauge and sizing: Use 20 sc × 22 rows per 10 cm as a planning gauge, then measure every purchased support and fitted household item.

Decorative cradle sleeve

  1. Ch 11. Row 1: sc in second chain and across [10]. Rows 2–70: ch 1, turn; sc in every stitch [10 each row]. Keep the same number of stitches at both edges; use markers in the first and last stitch. Make the number of panels specified in assembly. Wash and measure one before deciding the final size.

Fit to an existing rated guitar support

  1. The photo suggests a hanging guitar cradle. This interpretation is a removable crochet cover for an existing properly installed guitar support, not a yarn-only support for the instrument. Measure each contact arm and alter the 10-sc strip width and row length so it covers that padded contact area without obstructing the support’s retaining parts.
  2. Fold the strip around the existing contact pad and sew its long edges together to form a close sleeve. Make a second matching sleeve if the holder has two contact arms. Tie closures: ch 21, sl st along 20 chains; make four and sew pairs to the sleeve ends, keeping knots away from the guitar finish.
  3. For a smooth underside add a measured soft fabric backing to each sleeve, stitching only through the crochet. Keep the original holder’s retaining parts and fasteners visible. Use smooth colorfast yarn and test its contact with the instrument finish before use.

Assembly and finishing

  1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
  2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

3. Turtle Tissue-Box Cover

Turtle Tissue-Box Cover in sage, teal and gold
Turtle Tissue-Box Cover — visual reference for an original, physically untested crochet interpretation.

This turtle tissue-box cover combines sage, teal and gold with the form shown in the reference. The original construction below simplifies details that cannot be reliably recovered from a photograph; it does not promise an exact chart match.

Materials, gauge and size

Firm cotton, approximately 40–100 g for four chair socks, 50–100 g for a decorative guitar-support cover, or 250–500 g for the turtle or mushroom display. Colors: sage, teal and gold. Hook: 3–4 mm. These are estimates: weigh a sample, multiply by component count and add 15–20% for joining and adjustments.

Also use a yarn needle, scissors, stitch markers, measuring tape and blocking pins. For the guitar use an existing properly installed rated instrument holder. For the mushroom add a stable purchased base and post; for the turtle add a fitted tissue box. These structural supplies are part of the project.

Gauge and sizing: Use 20 sc × 22 rows per 10 cm as a planning gauge, then measure every purchased support and fitted household item.

Measured rectangular tissue cover

  1. Measure the actual box width A, depth B and height C. Example A = 22 cm, B = 11 cm, C = 10 cm at 20 sc × 22 rows per 10 cm. Top: ch 45; Row 1 sc across [44]. Rows 2–10 sc across [44]. Row 11: 10 sc, ch 24, skip 24, 10 sc [44 positions]. Row 12: 10 sc, 24 sc in chain opening, 10 sc [44]. Rows 13–24 sc across [44]. The long opening remains the tissue slit.
  2. Long sides: make two panels, ch 45 and work 44 sc for 22 rows. Short sides: make two, ch 23 and work 22 sc for 22 rows. Sew the four side panels into a rectangular ring, then sew their top edges to the top panel. Leave the underside open to insert the box.
  3. For checks, change gray and white after every four sc and after every four rows, using separate small balls so no long floats cross the back. At the lower rim work two sc rounds, fitting the cover to the actual box. Optional underside ties: make four cords ch 31 with 30 sl sts; sew one to each lower side midpoint and tie opposite pairs under the box. Recalculate panel widths and row heights from the actual gauge and dimensions.

Assembly and finishing

  1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
  2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

Turtle shell panels and head

  1. Use the tissue cover as the fitted inner shell. Make six small flat hexagons: 6 sc in magic ring, increase by six per round to 12, 18, 24 and 30; fasten off. Block each into six equal sides, five edge stitches per side. Use teal, sage and gold, one color per hexagon.
  2. Sew the six hexagons around the top opening and upper sides of the fitted cover, leaving the tissue slit completely clear. Add more hexagons only after measuring actual gaps, or cover gaps with plain sc fabric panels. This modular surface is a simplified turtle-shell interpretation.

Turtle head

  1. Work in continuous rounds with a marker. Round 1: work 6 sc in a magic ring [6]. Round 2: inc in every stitch [12].
  2. Round 3: (1 sc, inc) six times [18].
  3. Round 4: (2 sc, inc) six times [24].
  4. Rounds 5–7: sc around [24 each].
  5. Round 8: (2 sc, sc2tog) six times [18]. Add washable stuffing before the next decrease round; keep it firm but not visible through the stitches.
  6. Round 9: (1 sc, sc2tog) six times [12].
  7. Round 10: sc2tog six times [6].
  8. Cut yarn, thread through the last six front loops, pull closed and secure. Leave a long sewing tail. Use continuous rounds with a marker; do not add joining slip stitches.

Four flippers and tail

  1. Flipper: ch 7; sc in second chain and next 4, 3 sc in last chain, 4 sc along underside and 2 sc in starting chain [14]. Work two rounds of 14 sc, flatten and close through both layers [7 sc]. Make four, without stuffing, and sew to the lower shell sides.
  2. Tail: 6 sc in magic ring, one plain round, then (sc, sc2tog) twice [4]; close and sew at the rear. Sew the head securely to the front edge, keeping the cover removable from the purchased box. Embroider eyes and mouth. The cover is a decorative household object, not a stuffed toy.

Assembly and finishing

  1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
  2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

4. Mushroom Jewelry Display

Mushroom Jewelry Display in rust, cream and green
Mushroom Jewelry Display — visual reference for an original, physically untested crochet interpretation.

This mushroom jewelry display combines rust, cream and green with the form shown in the reference. The original construction below simplifies details that cannot be reliably recovered from a photograph; it does not promise an exact chart match.

Materials, gauge and size

Firm cotton, approximately 40–100 g for four chair socks, 50–100 g for a decorative guitar-support cover, or 250–500 g for the turtle or mushroom display. Colors: rust, cream and green. Hook: 3–4 mm. These are estimates: weigh a sample, multiply by component count and add 15–20% for joining and adjustments.

Also use a yarn needle, scissors, stitch markers, measuring tape and blocking pins. For the guitar use an existing properly installed rated instrument holder. For the mushroom add a stable purchased base and post; for the turtle add a fitted tissue box. These structural supplies are part of the project.

Gauge and sizing: Use 20 sc × 22 rows per 10 cm as a planning gauge, then measure every purchased support and fitted household item.

Flat sc base

  1. Round 1: In a magic ring, ch 1 and work 6 sc; join. [6 sc]
  2. Round 2: Work 2 sc in each stitch; join. [12]
  3. Round 3: Repeat (1 sc, 2 sc in next stitch) six times; join. [18 sc]
  4. Round 4: Repeat (2 sc, 2 sc in next stitch) six times; join. [24 sc]
  5. Round 5: Repeat (3 sc, 2 sc in next stitch) six times; join. [30 sc]
  6. Round 6: Repeat (4 sc, 2 sc in next stitch) six times; join. [36 sc]
  7. Round 7: Repeat (5 sc, 2 sc in next stitch) six times; join. [42 sc]
  8. Round 8: Repeat (6 sc, 2 sc in next stitch) six times; join. [48 sc]
  9. Round 9: Repeat (7 sc, 2 sc in next stitch) six times; join. [54 sc]
  10. Round 10: Repeat (8 sc, 2 sc in next stitch) six times; join. [60 sc]
  11. Round 11: Repeat (9 sc, 2 sc in next stitch) six times; join. [66 sc]
  12. Round 12: Repeat (10 sc, 2 sc in next stitch) six times; join. [72 sc]
  13. Round 13: Repeat (11 sc, 2 sc in next stitch) six times; join. [78 sc]
  14. Round 14: Repeat (12 sc, 2 sc in next stitch) six times; join. [84 sc]
  15. Round 15: Repeat (13 sc, 2 sc in next stitch) six times; join. [90 sc]
  16. Keep the beginning marked. If the disk cups, loosen tension; if it waves, check that each round has exactly six increases. Fasten off only after the final required round.

Green base and rigid display support

  1. The flat base ends with 90 sc. Work two plain 90-sc rounds and fasten off. Make a second matching disc. Insert a smooth purchased rigid base between them, with no sharp edges, and sew the crochet outlines together. This purchased support gives the display stability; crochet alone is not claimed to hold jewelry upright.
  2. Stem cover: ch 25, sc across [24] for 40 rows. Wrap around a purchased stable vertical display post fixed to the rigid base; sew the long edges and stitch the cover bottom to the green base. Adjust the strip to the actual post circumference and height. Keep the post fastening accessible and test the assembled base before adding trim.

Flat sc base

  1. Round 1: In a magic ring, ch 1 and work 6 sc; join. [6 sc]
  2. Round 2: Work 2 sc in each stitch; join. [12]
  3. Round 3: Repeat (1 sc, 2 sc in next stitch) six times; join. [18 sc]
  4. Round 4: Repeat (2 sc, 2 sc in next stitch) six times; join. [24 sc]
  5. Round 5: Repeat (3 sc, 2 sc in next stitch) six times; join. [30 sc]
  6. Round 6: Repeat (4 sc, 2 sc in next stitch) six times; join. [36 sc]
  7. Round 7: Repeat (5 sc, 2 sc in next stitch) six times; join. [42 sc]
  8. Round 8: Repeat (6 sc, 2 sc in next stitch) six times; join. [48 sc]
  9. Round 9: Repeat (7 sc, 2 sc in next stitch) six times; join. [54 sc]
  10. Round 10: Repeat (8 sc, 2 sc in next stitch) six times; join. [60 sc]
  11. Round 11: Repeat (9 sc, 2 sc in next stitch) six times; join. [66 sc]
  12. Round 12: Repeat (10 sc, 2 sc in next stitch) six times; join. [72 sc]
  13. Keep the beginning marked. If the disk cups, loosen tension; if it waves, check that each round has exactly six increases. Fasten off only after the final required round.

Mushroom cap and spots

  1. The second circular pattern is the cap top and ends with 72 sc. Work three plain 72-sc rounds to curve the edge, then one cream sc round [72]. Make a cream underside disc using the same twelve-round base, leaving a center opening if it must slide over the post; a separate fitted fabric underside is an acceptable purchased support cover.
  2. Sew cap top and underside around the outside, adding a little stuffing for shape while preserving a snug center passage for the post. Secure the cap to the post support so it cannot tip. Spots: make six discs, each 6 sc in a magic ring, increase to 12, fasten off; sew evenly to the cap.
  3. For earring display, hang only light findings through reinforced cap-edge stitches or through small purchased rings sewn to the underside. Do not rely on long dangling chains to carry the cap’s weight. Add optional small leaves to the green base, securing every tip. The structural base and post are purchased components explicitly included in materials.

Assembly and finishing

  1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
  2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

Similar Posts