7 Crochet Clothing and Shawl Ideas

1. Mauve Lace Triangle Shawl

This mauve lace triangle shawl highlights mauve. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: mauve. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Growing triangle shawl

1. US v-stitch = (dc, ch 1, dc) into one space. Ch 4 and join to ring. Row 1: ch 3 counts as first dc; work (2 dc, ch 2, 3 dc) into ring [6 dc, 1 center space]. Turn after every row.
2. Row 2: ch 3 counts as first dc and work 2 dc in same first stitch, dc in next 2 stitches; (2 dc, ch 2, 2 dc) in center; dc in next 2, 3 dc in last [14 dc]. Row 3: 3 dc in first, dc across to center, (2 dc, ch 2, 2 dc) in center, dc to last and 3 dc in last [22]. Row 4: repeat [30].
3. Continue the same edge and center increases on every row: each row adds eight dc, so Row r has 8r − 2 dc, divided equally on both sides. Row 30 has 238 dc, Row 40 has 318. On every fourth row, replace pairs of interior dc with (ch 1, skip 1, dc in next), keeping the first and last three dc on each half and all center increases solid. A chain space occupies one of the counted positions.
4. Work 40 rows or until the washed triangle measures your desired wingspan, usually 140–160 cm for an adult wrap. At the provisional gauge, a row count alone does not guarantee that size. Finish with one sc outline: one sc per stitch/chain position, approximately two per dc row edge, and three sc at the bottom point.

Mauve scalloped edging

1. Along each sloping side repeat (skip 1, 5 dc in next stitch, skip 1, sl st in next stitch), using plain sc for incomplete repeats at the upper corners and three sc at the bottom point. Block the point and both long sides symmetrically.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

2. Gray Diamond-Mesh Poncho

This gray diamond-mesh poncho highlights gray. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: gray. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Two-rectangle diamond-mesh poncho

1. Swatch the mesh first. Sample: 16 positions and 9 dc rows per 10 cm. Each 64-position × 63-row rectangle measures roughly 40 × 70 cm, but openwork stretches. Make two rectangles and measure them washed; adjust both equally for the intended shoulder width and drop.
2. Ch 66. Row 1: dc in fourth chain and across, counting skipped ch 3 as first dc [64]. Row 2: ch 3 counts as first dc, turn; (ch 2, skip 2, dc in next) 21 times [22 dc and 21 ch-2 spaces; 64 positions]. Row 3: ch 3 counts as first dc, turn; (2 dc in next space, dc in next dc) 21 times [64 dc]. Repeat Rows 2–3 to Row 63.
3. With both rectangles flat, sew the 40 cm short end of rectangle A to the last 40 cm of one long edge of B, forming an L. Fold around the body and sew B’s free short end to the corresponding last 40 cm of A’s free long edge. The two remaining 30 cm upper edge segments form an approximately 60 cm neck opening in this example. Pin and try on before permanent seams.
4. Neck: sc evenly around, then three more sc rounds. For a loose cowl, work four dc rounds without increasing; verify the opening passes over the head. Hem: one sc outline, then (skip 1, 5 dc in next, skip 1, sl st in next), adjusting incomplete repeats at corners with plain sc. This rectangular mesh interpretation does not reproduce the reference’s exact diamond chart.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

3. Dusty Rose Medallion Cardigan

This dusty rose medallion cardigan highlights dusty rose. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: dusty rose. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Open-center flower motif

1. Ch 8, join without twisting. Round 1: work 16 sc into the ring, not into individual chains; join [16].
2. Round 2: repeat (sc in next stitch, ch 5, skip next stitch) 8 times; join [8 sc and 8 loops].
3. Round 3: into each loop work (sc, hdc, 5 dc, hdc, sc), then sl st into the next anchor sc [8 petals, nine stitches per petal plus 8 anchor sl sts]. Fasten off with a long sewing tail.
4. Block the open center round. For a band, sew neighboring flowers together at two touching petal tips using at least four small stitches per connection. For a panel, lay out all motifs before sewing so every unit connects to at least two neighbors.

Medallion duster ground and layout

1. Make the counted mesh cardigan base below, then make 40 eight-petal medallions in the same dusty rose yarn. Use 12 on the back in four rows of three, eight on each front in four rows of two, and six on each sleeve in three rows of two.
2. Lay the washed garment flat before sewing. Pin every medallion so the petals lie inside panel edges and no underarm seam is obstructed. Sew each center and four evenly spaced petal tips. This is a medallion-applique interpretation over a mesh cardigan rather than an exact transcription of the open circular chart.

Measured open-front construction

1. Wash a swatch first. Sample gauge is 16 stitches and 9 dc rows per 10 cm. Back: 88 stitches (55 cm); two fronts: 40 each (25 cm). The body totals 105 cm before front bands. Choose a finished chest 8–12 cm larger than your bust, then recalculate panel widths; no commercial size is claimed.
2. Back foundation: ch 90; dc in fourth chain and across, counting skipped ch 3 as first dc [88]. Front foundation: ch 42; work the same way [40]. Make two matching fronts and one back. Turning ch 3 counts as one dc; never add an extra stitch in its base.
3. Fabric Row 2: ch 3 counts as first dc, turn; (ch 1, skip 1, dc in next) repeatedly to the last stitch, dc in last [88 or 40 positions]. Row 3: dc in every stitch and chain space [88 or 40]. Repeat these two rows to Row 72. This mesh ground supports separate floral appliqués instead of assuming the photographed flower-lace chart.
4. Block the three rectangles before seaming. Sew each front’s outside 32 top stitches to the corresponding outside 32 back stitches. Leave the middle 24 back stitches and each inner eight front stitches unsewn to form the neck. Sew side seams from the lower edge upward, leaving the top 18 cm open on each side for armholes, for an approximately 36 cm opening perimeter. Check this against the sleeve width before sewing.

Tapered sleeves and front bands

1. Make two sleeves from cuff to upper arm. Ch 38. Row 1: dc in fourth chain and across [36 including turning chain]. Rows 2–4: dc across [36]. Row 5: 2 dc in first stitch, dc to last, 2 dc in last [38]. Rows 6–8 plain [38].
2. Continue increasing two stitches on Rows 9, 13, 17, 21, 25, 29, 33, 37, 41 and 45 [40, 42, 44, 46, 48, 50, 52, 54, 56, 58]; all intervening rows are plain dc. Rows 46–48: dc across [58]. Measure the 58-stitch upper edge against the actual armhole: it must match without stretching. If necessary change width symmetrically or adjust the armhole opening before sewing.
3. Sew the sleeve top around the armhole, matching its center to the shoulder seam. Sew the sleeve long edge. Cuff: work 36 sc into the foundation [36], then two more sc rounds. Along both front edges and around the neck, pick up approximately two sc per dc row edge and one per top stitch, adjusting at corners to lie flat. Work five sc band rows. For functional buttons, on Row 3 replace two sc with ch 2 at five evenly spaced positions on one front; Row 4 work two sc in each opening. Sew matching buttons to the opposite front.
4. Use the forty medallions and placements specified above; omit the optional separate twenty-flower front trim.

Open-center flower motif

1. Ch 8, join without twisting. Round 1: work 16 sc into the ring, not into individual chains; join [16].
2. Round 2: repeat (sc in next stitch, ch 5, skip next stitch) 8 times; join [8 sc and 8 loops].
3. Round 3: into each loop work (sc, hdc, 5 dc, hdc, sc), then sl st into the next anchor sc [8 petals, nine stitches per petal plus 8 anchor sl sts]. Fasten off with a long sewing tail.
4. Block the open center round. For a band, sew neighboring flowers together at two touching petal tips using at least four small stitches per connection. For a panel, lay out all motifs before sewing so every unit connects to at least two neighbors.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

4. Green Floral Mesh Crop Top

This green floral mesh crop top highlights spring green. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: spring green. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Floral mesh body panels

1. Sample gauge: 16 positions × 9 dc rows = 10 cm. Two 64-position panels make about 80 cm circumference before seams; select bust plus 2–6 cm ease and round each panel to a multiple of eight. This is a measured sample, not a graded size.
2. Make front and back. Ch 66; Row 1 dc in fourth chain and across [64 including skipped ch 3]. Row 2: ch 3 counts as first dc, turn; (ch 1, skip 1, dc in next) 31 times; dc in last [64 positions]. Row 3: dc in every position [64]. Repeat Rows 2–3 to Row 23.
3. Straps: on each panel work the outside eight stitches separately for ten solid dc rows [8 each strap]; leave the middle 48 unworked. Sew front strap ends to matching back strap ends. Sew side seams, leaving the upper 8 cm open as armholes. Adjust strap length by trying on before final seams.
4. Work two sc outlines around the neck and each armhole, one sc per available stitch and approximately two per dc row edge. Work two sc hem rounds [128 before seam loss], distributing any reduction evenly to keep the edge flat.

1. With the center color work 10 sc into a magic ring; join [10]. With the petal color repeat (sl st in next sc, 5 dc in next sc) five times. [Five petals] Fasten off with a sewing tail; weave or sew both ends securely.

Tiny leaf

1. Ch 7. Starting in second chain, work sc, hdc, 2 dc, hdc, then 3 sc in the last chain. Working along the underside, hdc, 2 dc, hdc, sc [13 stitches]. Sl st to the beginning and fasten off. Make the number specified in the project, leaving sewing tails.

Floral surface decoration

1. Make twelve small five-petal flowers and twelve tiny leaves in the main green. Sew six flowers across the front and six across the back in two rows of three, positioning them over the mesh junctions. Sew one leaf beside each flower. Secure centers and petal tips; do not close the armholes with decoration.
2. Optional scalloped hem: (skip 1, 5 dc in next, skip 1, sl st in next) around, using plain sc to absorb the seam leftovers. A lining or camisole can be worn under the open mesh. This applique construction simplifies the reference’s connected floral motifs.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

5. Blue Floral Triangle Shawl

This blue floral triangle shawl highlights sky blue. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: sky blue. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Growing triangle shawl

1. US v-stitch = (dc, ch 1, dc) into one space. Ch 4 and join to ring. Row 1: ch 3 counts as first dc; work (2 dc, ch 2, 3 dc) into ring [6 dc, 1 center space]. Turn after every row.
2. Row 2: ch 3 counts as first dc and work 2 dc in same first stitch, dc in next 2 stitches; (2 dc, ch 2, 2 dc) in center; dc in next 2, 3 dc in last [14 dc]. Row 3: 3 dc in first, dc across to center, (2 dc, ch 2, 2 dc) in center, dc to last and 3 dc in last [22]. Row 4: repeat [30].
3. Continue the same edge and center increases on every row: each row adds eight dc, so Row r has 8r − 2 dc, divided equally on both sides. Row 30 has 238 dc, Row 40 has 318. On every fourth row, replace pairs of interior dc with (ch 1, skip 1, dc in next), keeping the first and last three dc on each half and all center increases solid. A chain space occupies one of the counted positions.
4. Work 40 rows or until the washed triangle measures your desired wingspan, usually 140–160 cm for an adult wrap. At the provisional gauge, a row count alone does not guarantee that size. Finish with one sc outline: one sc per stitch/chain position, approximately two per dc row edge, and three sc at the bottom point.

Eight-petal daisy motif

1. Round 1: with blue work 8 sc in a magic ring; join [8]. Round 2: with the same blue, in each sc work (sc, ch 3, dc, ch 3, sl st) [8 petals]. Fasten off with a sewing tail. Make the quantity stated in the project assembly; do not add a separate garland or leaf set.

Blue floral shawl edging

1. Make twelve small daisies in the same blue yarn. Space six along each sloping side, sew each center and three petal tips flat to the border, and leave the remaining tips free as a decorative scallop. The flowers are appliqued rather than integrated into the triangle lace. Add more only after measuring the blocked spacing.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

6. Crimson Lace Dress

This crimson lace dress highlights crimson. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: crimson. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Swatch and measured bodice

1. This is an untested adult sample, not a graded commercial size. Wash a dc/mesh swatch first. Worked example: 16 positions and 9 rows = 10 cm; two 80-position panels give 100 cm around the body. Use body bust plus 4–8 cm ease, divide by two and multiply by positions per cm; round each panel to a multiple of eight. The example fits only if the washed gauge and intended ease agree.
2. For each panel ch 82. Row 1: dc in fourth chain from hook and in each remaining chain; skipped ch 3 counts as first dc [80]. Row 2: ch 3 counts as first dc, turn; (ch 1, skip 1, dc in next) 39 times, dc in last stitch [41 dc and 39 spaces; 80 positions]. Row 3: ch 3 counts as first dc, turn; dc in each remaining stitch and once in each space [80 dc].
3. Rows 4–22: alternate Rows 2 and 3, ending with a mesh row [80 positions]. For a longer torso add complete two-row repeats before armhole shaping, measuring from the shoulder down rather than relying on the photo.
4. Armhole shaping: on the next row sl st across the first four positions, ch 3 counts as first dc in the next position, dc across the next 71 positions and leave the last four unworked [72 dc]. Mark this as Armhole Row 1. All later armhole rows are solid dc unless specified; ch 3 counts as first dc.

Neck and shoulder shaping

1. Front: after Armhole Row 1 divide into two 36-stitch halves. Work each half separately. On Armhole Rows 2–13 decrease once at the neckline on every row using dc2tog, keeping the outside armhole edge straight [35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24]. Rows 14–16: dc across [24 each shoulder].
2. Back: Armhole Rows 2–10 work across all 72 dc. Row 11: work each outside 24 stitches separately, leaving the middle 24 unworked. Rows 12–16: work each shoulder separately [24 each]. Sew matching 24-stitch shoulder seams. Sew side seams from foundation to armhole start, leaving the shaped upper edges open.
3. Neck edge: join at a shoulder, sc evenly around, using approximately two sc per dc row edge; sc2tog at sharp inside neckline corners. Join, then work one more sc round. Armhole edges: work one sc round, skipping a stitch at each underarm corner if needed to prevent flaring. Actual edge totals depend on the measured row extensions, so record them rather than assuming a fixed perimeter.

Joined skirt rounds

1. Join at the bodice lower edge; work into all 160 foundation positions. Round 1: (dc in next 19, 2 dc in next) eight times [168 dc]. The ch 3 at a round beginning counts as its first dc; join each round and do not count the joining sl st.
2. Round 2: dc in each stitch [168]. Round 3: (sc in next stitch, skip 2, 5 dc in next, skip 2) 28 times; join [28 sc and 140 dc; 168 positions]. Round 4: dc in every sc and dc [168]. Rounds 5–7: repeat the shell round on odd-numbered rounds and the plain dc round on even-numbered rounds [168].
3. Round 8: (dc in next 6, 2 dc in next) 24 times [192]. Rounds 9–15: alternate a shell round and a plain dc round [192 positions; 32 shells on shell rounds]. Round 16: (dc in next 7, 2 dc in next) 24 times [216]. Rounds 17–23: alternate shell and dc rounds [216; 36 shells].
4. Round 24: (dc in next 8, 2 dc in next) 24 times [240]. Rounds 25–31: alternate shell and dc rounds [240; 40 shells]. Round 32: (dc in next 9, 2 dc in next) 24 times [264]. Rounds 33–39: alternate shell and dc rounds [264; 44 shells]. Round 40: (dc in next 10, 2 dc in next) 24 times [288]. Rounds 41–42: one shell round then one dc round [288; 48 shells].
5. At 9 dc rows per 10 cm the skirt is roughly 47 cm long, but shell rows have a different height: measure the washed fabric. Add pairs of shell/dc rounds at the final count for extra length. Use the stated main color throughout. Hem: sc around once [288], then fasten off. Add a separately sewn lightweight lining and fit the waist before final hemming.

Crimson lace finishing

1. Make a separately sewn light lining to the desired coverage, attaching it at the neckline and shoulder seams with small flexible stitches. The original crochet interpretation uses a V-neck bodice and counted shell skirt rather than the exact photographed leaf lace.
2. Optional belt: ch 7; sc in second chain and across [6]; repeat 6-sc rows until it fits the waist plus 20 cm and sew on a suitable buckle. For short sleeves make two rectangles, ch 58 and work 56 dc for eight rows. Match each upper edge to the measured armhole, sew around the opening and close the sleeve seam. Change the rectangle width by even numbers if the armhole requires it.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

7. Blue Scalloped Lace Duster

This blue scalloped lace duster highlights blue. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.

Materials, gauge and size

Smooth DK clothing yarn, approximately 400–700 g for a shawl, 300–500 g for a crop top, 600–1,000 g for a poncho, or 800–1,400 g for a dress or long cardigan. Colors: blue. Hook: 3.5–4 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.

Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add lining for the dress and suitable buttons or buckle where specified.

Gauge and size: Provisional sample gauge: 16 positions × 9 dc rows = 10 cm. Wash the actual mesh or solid swatch. Use body measurements plus stated ease; examples are not a tested graded size range.

Measured open-front construction

1. Wash a swatch first. Sample gauge is 16 stitches and 9 dc rows per 10 cm. Back: 88 stitches (55 cm); two fronts: 40 each (25 cm). The body totals 105 cm before front bands. Choose a finished chest 8–12 cm larger than your bust, then recalculate panel widths; no commercial size is claimed.
2. Back foundation: ch 90; dc in fourth chain and across, counting skipped ch 3 as first dc [88]. Front foundation: ch 42; work the same way [40]. Make two matching fronts and one back. Turning ch 3 counts as one dc; never add an extra stitch in its base.
3. Texture Row 2: ch 3 counts as first dc, turn; dc across [88 or 40]. Row 3: ch 3, turn; (ch 1, skip 1, dc in next) to last stitch; dc in last [88 or 40 positions]. Row 4: dc in every position [same]. Repeat Rows 3–4 to Row 72.
4. Block the three rectangles before seaming. Sew each front’s outside 32 top stitches to the corresponding outside 32 back stitches. Leave the middle 24 back stitches and each inner eight front stitches unsewn to form the neck. Sew side seams from the lower edge upward, leaving the top 18 cm open on each side for armholes, for an approximately 36 cm opening perimeter. Check this against the sleeve width before sewing.

Tapered sleeves and front bands

1. Make two sleeves from cuff to upper arm. Ch 38. Row 1: dc in fourth chain and across [36 including turning chain]. Rows 2–4: dc across [36]. Row 5: 2 dc in first stitch, dc to last, 2 dc in last [38]. Rows 6–8 plain [38].
2. Continue increasing two stitches on Rows 9, 13, 17, 21, 25, 29, 33, 37, 41 and 45 [40, 42, 44, 46, 48, 50, 52, 54, 56, 58]; all intervening rows are plain dc. Rows 46–48: dc across [58]. Measure the 58-stitch upper edge against the actual armhole: it must match without stretching. If necessary change width symmetrically or adjust the armhole opening before sewing.
3. Sew the sleeve top around the armhole, matching its center to the shoulder seam. Sew the sleeve long edge. Cuff: work 36 sc into the foundation [36], then two more sc rounds. Along both front edges and around the neck, pick up approximately two sc per dc row edge and one per top stitch, adjusting at corners to lie flat. Work five sc band rows. For functional buttons, on Row 3 replace two sc with ch 2 at five evenly spaced positions on one front; Row 4 work two sc in each opening. Sew matching buttons to the opposite front.
4. Optional patch pockets: ch 26, work 24 dc for 12 rows. Make two, sc around each and sew three edges to the fronts about 12 cm above the hem, leaving the top open.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.

Blue scallop finishing

1. After the five-row front band, add (skip 1, 5 dc in next stitch, skip 1, sl st in next) along each outside front edge and the lower hem. Use plain sc for an incomplete repeat near the neck. Add the same edge around each cuff after checking hand clearance. This uses a counted mesh-and-scallop ground instead of claiming the pictured leaf-lace chart.

Assembly and finishing

1. Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
2. Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.