4 Crochet Angel and Holiday Ornament Ideas
Explore four crochet angel and holiday ornament ideas: a moon and star, spiral angels, a flat lace angel and festive hanging figures, with US terms. Each photo is paired with an original construction, materials, counted steps and finishing notes.
US crochet terms and working rules
ch = chain; sl st = slip stitch; sc = single crochet; hdc = half double crochet; dc = double crochet; inc = 2 stitches in one stitch; sc2tog = single crochet two stitches together; st(s) = stitch(es); sp = space; RS = right side. A magic ring is an adjustable yarn loop. Numbers in brackets give end-of-round or end-of-row counts. Repeat instructions between parentheses the stated number of times.
Unless a step explicitly says otherwise, beginning chains do not count as stitches. For dc rounds, ch 2 to reach height, then work the first dc into the first stitch; join to the first real dc. For sc rounds, ch 1 and join to the first sc. For flat sc rows, ch 1 and turn. Flat dc rows explicitly use ch 3 as the first counted dc. Do not work into joining slip stitches. Change color by completing the last yarn-over of the preceding stitch with the new yarn.
To work sc2tog: insert hook into the next stitch and draw up a loop, repeat in the following stitch, yarn over and draw through all three loops. For a surface slip stitch, bring the yarn up from behind the fabric, insert the hook into the next chosen gap and pull the new loop through the loop already on the hook. Keep these stitches loose.
US terms: inc = 2 stitches of the stated type in one stitch; sc2tog/dc2tog/dc3tog = work two or three stitches together as named; BLO = back loop only; FPdc = front-post double crochet; tr = treble crochet. Ch 3 counts as a dc unless stated otherwise; ch 1 for turning never counts. Joined rounds close with sl st unless continuous rounds are specified. The printed charts in some photographs are reference content, not instructions verified or transcribed here.
1. Golden Crescent Moon and Star

This golden crescent moon and star highlights gold. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.
Materials, gauge and size
Sport/DK cotton, approximately 25–70 g per ornament. Colors: gold. Hook: 2–3 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.
Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add washable stuffing for heads, felt for the optional moon insert and embroidery thread for faces.
Gauge and size: Use firm sc near 22 sc per 10 cm for stuffed heads; measure a sample to check the relative scale of flat and stuffed pieces.
Flat crescent with counted short rows
- Ch 31. Row 1: sc in second chain and across [30]. Row 2: ch 1, turn; sc2tog, 26 sc, sc2tog [28]. Row 3: ch 1, turn; sl st in first 3 stitches, sc in next 22, leave last 3 unworked [22 active sc]. Row 4: ch 1, turn; sc2tog, 18 sc, sc2tog [20].
- Row 5: ch 1, turn; sl st in first 3, sc in next 14, leave last 3 unworked [14 active sc]. Row 6: ch 1, turn; sc2tog, 10 sc, sc2tog [12]. Row 7: ch 1, turn; sc2tog, 8 sc, sc2tog [10]. Fasten off. This stepped shallow shape becomes the crescent when blocked around a curved outer line; the stepped side faces inward.
- Work one loose sc outline along all exposed steps and edges, with 2 sc at each outside step corner and sc2tog at sharp inside corners. Make a second matching crescent and whipstitch their outlines together. Add a thin felt crescent inside if desired; do not stretch the inner edge into a straight line.
Five-point star and suspension
- Star Round 1: 10 sc in a magic ring [10]. Round 2: (sc in next stitch, ch 5; sl st in second chain from hook, sc in next, hdc in next, dc in last; skip next base stitch) five times; join [5 points, 5 base anchors]. Fasten off, block each point and secure the center.
- Make a star cord: ch 21 and sl st along 20 chains. Sew one end to the star top and the other to the crescent’s upper inner tip so the star hangs inside the curve. Make a hanging loop ch 21 with 20 sl sts and sew both ends through both crescent layers. This soft, stepped crescent is an original interpretation of the photographed solid crescent.
Assembly and finishing
- Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
- Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.
2. Pastel Spiral Angel Ornaments

This pastel spiral angel ornaments highlights cream, dusty rose, sage and gold. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.
Materials, gauge and size
Sport/DK cotton, approximately 25–70 g per ornament. Colors: cream, dusty rose, sage and gold. Hook: 2–3 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.
Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add washable stuffing for heads, felt for the optional moon insert and embroidery thread for faces.
Gauge and size: Use firm sc near 22 sc per 10 cm for stuffed heads; measure a sample to check the relative scale of flat and stuffed pieces.
Angel head
- Work in continuous rounds with a marker. Round 1: work 6 sc in a magic ring [6]. Round 2: inc in every stitch [12].
- Round 3: (1 sc, inc) six times [18].
- Round 4: (2 sc, inc) six times [24].
- Rounds 5–7: sc around [24 each].
- Round 8: (2 sc, sc2tog) six times [18]. Add washable stuffing before the next decrease round; keep it firm but not visible through the stitches.
- Round 9: (1 sc, sc2tog) six times [12].
- Round 10: sc2tog six times [6].
- Cut yarn, thread through the last six front loops, pull closed and secure. Leave a long sewing tail. Use continuous rounds with a marker; do not add joining slip stitches.
Spiral dress and wings
- Dress: ch 31; work 3 sc in second chain and in each remaining chain [90]. Row 2: 2 sc in every stitch [180]. Fasten off and let the ruffle form a spiral. Add one contrasting sl st per Row-2 stitch [180], keeping the edge loose. Sew the upper short edge to the head base.
- Wings, make two: ch 4, join ring. Row 1: ch 3 counts as first dc and work 6 dc into ring [7]. Row 2: 2 dc in each stitch [14]. Row 3: sc across [14]. Sew straight edges behind the head and upper dress. For the gold halo ch 21, join ring, then sl st into each of 21 chains; stitch the lower arc to the back of the head.
- Make one small bottom ball: 6 sc in magic ring, increase to 12, work one 12-sc round, then six sc2tog [6]; stuff lightly and close. Sew to the lower spiral end. Make a hanging loop ch 21 with 20 sl sts; stitch both ends through the head under the halo. Embroider closed eyes and tiny smile. Make three angels in dusty rose, cream and sage, using gold edging.
Assembly and finishing
- Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
- Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.
3. Flat Pink Lace Angel

This flat pink lace angel highlights pink and ivory. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.
Materials, gauge and size
Sport/DK cotton, approximately 25–70 g per ornament. Colors: pink and ivory. Hook: 2–3 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.
Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add washable stuffing for heads, felt for the optional moon insert and embroidery thread for faces.
Gauge and size: Use firm sc near 22 sc per 10 cm for stuffed heads; measure a sample to check the relative scale of flat and stuffed pieces.
Flat angel head and fan dress
- Head: joined rounds, 6 sc in magic ring [6], then inc in each stitch [12]. Round 3: (sc, inc) six times [18]. Fasten off flat, without stuffing. Make one ivory disc.
- Dress Row 1: ch 8; sc in second chain and across [7]. Row 2: ch 3 counts as first dc, turn; dc in same first stitch, dc in next 5, 2 dc in last [9]. Row 3: 2 dc in first, dc in next 7, 2 dc in last [11]. Continue increasing at each end on Rows 4–8 [13, 15, 17, 19, 21].
- Row 9: ch 1, turn; (sc in next stitch, skip 1, 5 dc in next, skip 1) five times; sc in last [5 shells and 6 sc; 31 stitches]. Fasten off. Sew the seven-stitch dress top behind the bottom third of the head.
- Wings, make two: ch 4, join to ring. Row 1: ch 3 counts as first dc and work 6 more dc in ring [7]. Row 2: 2 dc in each stitch [14]. Row 3: sc across [14]. Sew each wing’s straight ring-side edge behind the upper dress, with the curved edge outward. Embroider eyes and smile on the head.
- Halo: ch 16, join without twisting and sl st once around all 16 chains; sew its lower arc behind the head. Hanging loop: ch 21, sl st back along 20 chains and sew both ends to the head/halo join. Embroider a small gold knot at the dress neck. Block flat and reinforce the head-to-dress seam.
Assembly and finishing
- Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
- Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.
4. Festive Spiral Hanging Figures

This festive spiral hanging figures highlights red, white, green, cream and black. The written version explains a complete original construction while simplifying details that cannot be recovered reliably from the photograph.
Materials, gauge and size
Sport/DK cotton, approximately 25–70 g per ornament. Colors: red, white, green, cream and black. Hook: 2–3 mm. Quantities are estimates; weigh a sample and add 15–20% for assembly, edging and adjustments.
Also use a yarn needle, scissors, markers, measuring tape and blocking pins. Add washable stuffing for heads, felt for the optional moon insert and embroidery thread for faces.
Gauge and size: Use firm sc near 22 sc per 10 cm for stuffed heads; measure a sample to check the relative scale of flat and stuffed pieces.
Character head
- Work in continuous rounds with a marker. Round 1: work 6 sc in a magic ring [6]. Round 2: inc in every stitch [12].
- Round 3: (1 sc, inc) six times [18].
- Round 4: (2 sc, inc) six times [24].
- Round 5: (3 sc, inc) six times [30].
- Rounds 6–9: sc around [30 each].
- Round 10: (3 sc, sc2tog) six times [24].
- Round 11: (2 sc, sc2tog) six times [18]. Add washable stuffing before the next decrease round; keep it firm but not visible through the stitches.
- Round 12: (1 sc, sc2tog) six times [12].
- Round 13: sc2tog six times [6].
- Cut yarn, thread through the last six front loops, pull closed and secure. Leave a long sewing tail. Use continuous rounds with a marker; do not add joining slip stitches.
Spiral hanging body
- Ch 41. Row 1: work 3 sc in second chain and in every remaining chain [120 sc]. Row 2: ch 1, turn; work 2 sc in every stitch [240 sc]. Fasten off and let the strip curl naturally. Do not sew its long edges together. Make five strips in white, blue, white, green and pink for the five character versions.
- Contrasting spiral edge: join at one end of Row 2 and work one sl st in each stitch [240], keeping it loose. A firmer slip-stitch edge can change curl tightness; make a short sample first. Sew the top short edge securely to the bottom of the stuffed head, enclosing the raw chain tail.
Hat and bottom pom-pom
- Hat, continuous rounds: Round 1: 6 sc in magic ring [6]. Round 2 plain [6]. Round 3: (sc, inc) three times [9]. Round 4 plain [9]. Round 5: (2 sc, inc) three times [12]. Round 6 plain [12]. Round 7: (sc, inc) six times [18]. Round 8 plain [18]. Round 9: (2 sc, inc) six times [24]. Round 10 plain [24]. Round 11: (3 sc, inc) six times [30]. Rounds 12–14 plain [30]. Round 15: contrasting sc around [30]. Sew to the head without stuffing.
- Make one small crocheted pom-pom: 6 sc in magic ring, increase to 12, work two rounds of 12, then six sc2tog [6]; stuff lightly and close. Make two per ornament, one for hat tip and one for the spiral bottom. Sew securely through several stitches. Hanging loop: ch 21, sl st along 20 chains and sew both ends through the hat into the head.
Five character details
- Snowman: white head, blue hat and blue strip; embroider black eyes and an orange nose. Scarf: ch 31, sc along 30 chains and sew it flat around the neck. Santa: peach head, red hat, white strip edged red. Beard: ch 10; sc across [9], decrease at each end on the next three rows [7, 5, 3], then sc3tog [1]; sew beneath embroidered eyes.
- Red-hat holiday friend: peach head, red hat and white strip with red/green edge accents; embroider rosy cheeks and a smile. Green character: green head and strip, red hat, embroidered dark eyebrows and smile. Pink winter friend: white head, pink hat and pink strip; use the same 30-sc scarf in pink. Make the optional white beard only for Santa. All face features are stitched, with no claim to reproduce a named character pattern.
- To make an optional hat snowflake, embroider six straight spokes meeting at one center and two tiny diagonal branches near each spoke tip. Check every pom-pom, scarf and suspension join before displaying. These are decorative ornaments, with untested construction and no safety certification implied.
Assembly and finishing
- Check all counts before joining. Weave ends through several stitches in three directions. Sew point joins more than once and distribute tension evenly.
- Wash a sample using the yarn care instructions, block gently and allow it to dry completely. Recheck fit or motif size after washing. These original patterns are photo-inspired and physically untested; they do not reproduce a verified photographed chart.
Six festive versions
- Use the shared head, spiral, hat, pom-pom and embroidered face construction above. In addition to the five base variants, make one snowman with a flat top hat. Brim: 6 sc in a magic ring, increase to 12 then 18; work one 18-sc round. Fasten off. Make the crown separately as specified next.
- For clarity, the separate-tube top hat is recommended: ch 12, join ring, work 12 sc for six rounds, gather its top closed, and sew its bottom around the brim center. Use a white head, white spiral and red embroidered scarf. The six suggested figures interpret the photographed set rather than reproducing its precise faces or accessories.
